For most projects, dried lumber is the clear deal. Air- or kiln-dried lumber is much more stable and simply works best for most furniture projects. But there are times when green lumber — stock with high moisture content — is actually a better bet. For example, if you are steam-bending lumber, green stock with a moisture rating of between 20 and 25 percent will bend much easier and with significantly less fracturing. Green woodturning is something that I enjoy very much, with streams of wood flowing like water from the blank. It is so much faster! And back in the day, bodgers and chairmakers took advantage of turned and dried chair legs mounted into a green wooden chair or stool bottom. As the bottoms dried out, the legs became even more firmly grasped by the shrinking wood. Very clever!
Do you have a use where you prefer green lumber to seasoned stock? I’d love to hear about it.
Rob Johnstone, Woodworker’s Journal
Tips for Finishing Outdoor Furniture
Our expert presents several options for exterior finishes – including leaving the wood au naturel.
Cutting Box Joints on a Router Table
A simple way to cut box joints using a special jig and your router table.
From Our Sponsor
| Take a deep dive into deep pour epoxy! This exciting material has opened its own world of design and finish in the woodworking realm. The MAS deep pour system is specifically designed for molding, encapsulating, and creating deep pour castings, such as those used in live edge river tables and ocean tables. Soak up the video and see what inspires you to mix up a batch. |
